For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
ULTEM 9085

ULTEM 9085

Engineering Plastics
Heat resistantChemical resistantFunctionalFlame retardant

ULTEM 9085 is a flame-retardant high-performance thermoplastic for digital manufacturing and rapid prototyping. It is ideal for the transportation industry due to its high strength-to-weight ratio and its FST (flame, smoke, and toxicity) rating. ULTEM 9085 allows design and manufacturing engineers to produce fully functional parts that are ideal for advanced functional prototypes or end-use parts without the cost or lead time of traditional tooling. It has a lower resistance to chemicals but is highly retardant to flames (UL94 V-0 compliant).

Print with ULTEM 9085
Mechanical Properties
Tensile strength69–86 MPa
Tensile modulus2150–2230 MPa
Elongation4.5–6 %
Flexural strength90–116 MPa
Flexural modulus2126–2500 MPa
Density1.34 g/cm³
Thermal
Heat deflection at 66 PSI158–175 °C
Print Constraints

Maximum build volume

914 × 610 × 914 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.8 mm
Min engraving0.8 mm
Accuracy± 0.3 mm
Warping riskOver_140_mm
Interlocking partsNot supported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

3 colors

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

Sanded

Sanded

3 colors

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials