Somos® GP Plus 14122

Functional Resins

FunctionalHigh detailVisualSmooth

Somos GP Plus 14122 is ideal for prototyping all kinds of plastic parts which do not have the highest of toughness requirements. It is also capable of delivering fine details and a smooth surface. Just be aware that thin prints can be slightly fragile, as the used photopolymers are quite brittle.

Print with Somos® GP Plus 14122

Mechanical Properties

Tensile strength33.8–55 MPa

Tensile modulus2370–2650 MPa

Elongation5–10 %

Flexural strength67.3–95 MPa

Flexural modulus2178–2500 MPa

Density1.2 g/cm³

Thermal

Heat deflection at 66 PSI46–55 °C

Heat deflection at 264 PSI41 °C

Print Constraints

Maximum build volume

1700 × 800 × 650 mm

Default layer height0.1 mm

Default infill100%

Min embossing0.2 mm

Min engraving0.2 mm

Accuracy± 0.2 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

1 color

Solid white Resin, smooth surface with a high level of detail.

All materials