SLS/MJF Glass-Filled Nylon PA12

Nylons

StrongHeat resistantChemical resistantFunctional

This material is a combination of polyamide powder (PA12) and glass fibers. It is more durable and has a higher resistance than standard Nylon PA12. It allows for creating complex structures and stiff functional parts. It has a high thermal capability (170 °C) and is commonly used in the automotive and construction industry. It is not advisable for detailed parts.

Print with SLS/MJF Glass-Filled Nylon PA12

Mechanical Properties

Tensile strength30–48 MPa

Tensile modulus2997–4068 MPa

Elongation2–8 %

Flexural strength37–73 MPa

Flexural modulus2600–3106 MPa

Density1.3 g/cm³

Thermal

Heat deflection at 66 PSI157–179 °C

Print Constraints

Maximum build volume

520 × 520 × 830 mm

Default layer height0.1 mm

Default infill100%

Min embossing0.5 mm

Min engraving0.5 mm

Accuracy± 0.3 mm

Warping riskOver_140_mm

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

17 colors

Glass-Filled nylon with a raw granular surface finish.

Shot Peened

17 colors

Shot peening improves both the aesthetic and functional durability of the models, making them smoother and more resilient.

Polished

17 colors

Glass-Filled Nylon with a polished smooth surface finish.

Vapor Smoothed

17 colors

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

All materials

SLS/MJF Glass-Filled Nylon PA12

Nylons

StrongHeat resistantChemical resistantFunctional

Print with SLS/MJF Glass-Filled Nylon PA12

Mechanical Properties

Tensile strength30–48 MPa

Tensile modulus2997–4068 MPa

Elongation2–8 %

Flexural strength37–73 MPa

Flexural modulus2600–3106 MPa

Density1.3 g/cm³

Thermal

Heat deflection at 66 PSI157–179 °C

Print Constraints

Maximum build volume

520 × 520 × 830 mm

Default layer height0.1 mm

Default infill100%

Min embossing0.5 mm

Min engraving0.5 mm

Accuracy± 0.3 mm

Warping riskOver_140_mm

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

17 colors

Glass-Filled nylon with a raw granular surface finish.

Shot Peened

17 colors

Shot peening improves both the aesthetic and functional durability of the models, making them smoother and more resilient.

Polished

17 colors

Glass-Filled Nylon with a polished smooth surface finish.

Vapor Smoothed

17 colors

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

All materials