SLS Flexible TPE

Flexible Plastics

Chemical resistantFlexibleImpact resistantWear resistant

SLS TPE (Thermoplastic Elastomer) is a versatile, flexible material known for its rubber-like elasticity and resilience. It combines the advantageous properties of both thermoplastics and elastomers, offering excellent flexibility, impact resistance, and fatigue endurance. TPE exhibits good thermal stability and can withstand a wide range of temperatures, making it suitable for diverse applications. Its chemical resistance to oils, solvents, and various chemicals enhances its durability in challenging environments. TPE is often preferred for its ease of processing and recycling capabilities, contributing to sustainable manufacturing practices. TPE is commonly used in producing flexible hoses, seals, gaskets, footwear, and medical devices, where comfort and adaptability are critical.

Print with SLS Flexible TPE

Mechanical Properties

Tensile strength5–15 MPa

Tensile modulus5–48 MPa

Elongation300–600 %

Flexural strength5–25 MPa

Flexural modulus10–50 MPa

Density1.15 g/cm³

Thermal

Heat deflection at 66 PSI40–60 °C

Heat deflection at 264 PSI20–40 °C

Print Constraints

Default layer height0.15 mm

Default infill100%

Min embossing0.3 mm

Min engraving0.3 mm

Accuracy± 1.8 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

25 colors

The standard finish of SLS/MJF TPE is slightly granular and has a soft touch and feel.

Polished

25 colors

Smooth and glossy finish achieved through a chemical treatment of the printed part.

Vapor Smoothed

25 colors

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

All materials

SLS Flexible TPE

Flexible Plastics

Chemical resistantFlexibleImpact resistantWear resistant

Print with SLS Flexible TPE

Mechanical Properties

Tensile strength5–15 MPa

Tensile modulus5–48 MPa

Elongation300–600 %

Flexural strength5–25 MPa

Flexural modulus10–50 MPa

Density1.15 g/cm³

Thermal

Heat deflection at 66 PSI40–60 °C

Heat deflection at 264 PSI20–40 °C

Print Constraints

Default layer height0.15 mm

Default infill100%

Min embossing0.3 mm

Min engraving0.3 mm

Accuracy± 1.8 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

25 colors

The standard finish of SLS/MJF TPE is slightly granular and has a soft touch and feel.

Polished

25 colors

Smooth and glossy finish achieved through a chemical treatment of the printed part.

Vapor Smoothed

25 colors

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

All materials