Print
Material
Metal-Filled PLA

Metal-Filled PLA

Standard Plastics
Visual

The composition of metal-filled PLA can differ a lot so that it can be split up in various finishes. Higher metal content means more brittle, higher density, and better polishing capabilities.

Print with Metal-Filled PLA
Mechanical Properties
Tensile strength25–45 MPa
Tensile modulus2000–3500 MPa
Elongation1–3 %
Flexural strength35–60 MPa
Flexural modulus2000–3500 MPa
Density1.85 g/cm³
Thermal
Heat deflection at 66 PSI55–60 °C
Print Constraints

Maximum build volume

601 × 601 × 601 mm

Default layer height0.2 mm
Default infill20%
Min embossing0.4 mm
Min engraving0.4 mm
Accuracy± 0.3 mm
Warping riskLow
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

40% Bronze-Filled PLA

40% Bronze-Filled PLA

1 color

Metal-filled PLA-based filament with approximately 40% bronze filling.

80% Bronze-Filled PLA

80% Bronze-Filled PLA

1 color

Metal-filled PLA-based filament with approximately 80% of gravimetric bronze filling.

80% Copper-Filled PLA

80% Copper-Filled PLA

1 color

Metal-filled PLA with approximately 80% of gravimetric copper filling.

40% Iron-Filled PLA

40% Iron-Filled PLA

1 color

Metal-filled PLA-based filament with approximately 40% iron filling.

All materials