For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
iglidur® I180-PF

iglidur® I180-PF

Engineering Plastics
Wear resistantDurableHeat resistantWater resistant

iglidur I180-PF has been specifically developed for moving applications and is very well suited for abrasion-resistant parts, such as plain bearings, gears, and drive nuts. The higher wear resistance as well as a higher temperature resistance (100 °C long-term) extend the field of application, especially for more dynamic and wear-resistant applications.

Print with iglidur® I180-PF
Mechanical Properties
Tensile strength44–50 MPa
Tensile modulus1000–1200 MPa
Elongation5–10 %
Flexural strength33–44 MPa
Flexural modulus1000–1200 MPa
Density1.21 g/cm³
Print Constraints

Maximum build volume

601 × 601 × 601 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.2 mm
Warping riskOver_140_mm
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

2 colors

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

All materials