For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
iglidur® I150-PF

iglidur® I150-PF

Engineering Plastics
DurableWear resistantWater resistant

iglidur I150-PF is characterized by high wear resistance as the material is enriched with solid lubricants. Due to its high wear resistance and good mechanical properties (strength, toughness, layer adhesion), it is an all-round material that is suitable for most applications. Furthermore, it is suitable for food contact due to its conformity to EU 10/2011.

Print with iglidur® I150-PF
Mechanical Properties
Tensile strength50–70 MPa
Tensile modulus1800–3000 MPa
Elongation5–15 %
Flexural strength54 MPa
Flexural modulus1700 MPa
Density1.3 g/cm³
Print Constraints

Maximum build volume

990 × 990 × 990 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.8 mm
Min engraving0.8 mm
Accuracy± 0.2 mm
Warping riskLow
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

2 colors

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

All materials