HP® PEEK

Engineering Plastics

Heat resistantChemical resistantStrong

Exceptional mechanical and thermal properties and high chemical resistance make PEEK to be considered as a substitution for aluminum. The filament perfectly combines good sliding properties, mechanical strength and resistance to high temperatures. Perfect for lightweight and strong applications.

Print with HP® PEEK

Mechanical Properties

Tensile strength98–100 MPa

Tensile modulus3720–3738 MPa

Elongation28–40 %

Flexural strength130–170 MPa

Flexural modulus2700–4200 MPa

Density1.3 g/cm³

Thermal

Heat deflection at 66 PSI140–152 °C

Print Constraints

Maximum build volume

365 × 365 × 415 mm

Default layer height0.2 mm

Default infill20%

Min embossing0.5 mm

Min engraving0.5 mm

Accuracy± 0.3 mm

Warping riskHigh

Interlocking partsNot supported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

1 color

Standard layered finish in solid beige.

All materials