HP® MJF Nylon PA11

Nylons

Impact resistantDurableBiomedicalFunctional

PA11 is a bio-derived material with exceptionally high toughness. This material has the particularity of offering high ductility and impact strength for all applications. It is also a sustainable material, making it appropriate for businesses looking to reduce their environmental impact.

Print with HP® MJF Nylon PA11

Mechanical Properties

Tensile strength52 MPa

Tensile modulus1800 MPa

Elongation35–50 %

Flexural strength70 MPa

Flexural modulus1800 MPa

Density1.05 g/cm³

Thermal

Heat deflection at 66 PSI150–188 °C

Heat deflection at 264 PSI54 °C

Print Constraints

Maximum build volume

400 × 300 × 400 mm

Default layer height0.1 mm

Default infill100%

Min embossing0.6 mm

Min engraving0.6 mm

Accuracy± 0.3 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

19 colors

Raw MJF Nylon featuring a coarse texture.

Polished

19 colors

Polished MJF Nylon featuring a smooth texture

Vapor Smoothed

19 colors

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

Shot Peened

19 colors

Shot peening improves both the aesthetic and functional durability of the models, making them smoother and more resilient.

Electroplated

8 colors

Electroplating is a process where a thin layer of metal is applied to plastic surfaces to enhance durability, corrosion resistance, and electrical conductivity.

All materials

HP® MJF Nylon PA11

Nylons

Impact resistantDurableBiomedicalFunctional

Print with HP® MJF Nylon PA11

Mechanical Properties

Tensile strength52 MPa

Tensile modulus1800 MPa

Elongation35–50 %

Flexural strength70 MPa

Flexural modulus1800 MPa

Density1.05 g/cm³

Thermal

Heat deflection at 66 PSI150–188 °C

Heat deflection at 264 PSI54 °C

Print Constraints

Maximum build volume

400 × 300 × 400 mm

Default layer height0.1 mm

Default infill100%

Min embossing0.6 mm

Min engraving0.6 mm

Accuracy± 0.3 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

19 colors

Raw MJF Nylon featuring a coarse texture.

Polished

19 colors

Polished MJF Nylon featuring a smooth texture

Vapor Smoothed

19 colors

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

Shot Peened

19 colors

Shot peening improves both the aesthetic and functional durability of the models, making them smoother and more resilient.

Electroplated

8 colors

Electroplating is a process where a thin layer of metal is applied to plastic surfaces to enhance durability, corrosion resistance, and electrical conductivity.

All materials