For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
High-Temperature Resin

High-Temperature Resin

Functional Resins
Heat resistantHigh detailDurableVisual

High-temperature resin is formulated to withstand significantly more heat than standard resin. Heat deflection temperature varies meaningfully by formulation and post-curing. Some formulations reach roughly 140 °C with standard post-curing, while more extensively post-cured or higher-performance formulations can exceed 200 °C, with some going well beyond that. This makes high-temperature resin well suited to parts exposed to hot air, gas, or fluid flow, as well as molds, inserts, and fixtures that need to hold their shape under sustained heat.

Print with High-Temperature Resin
Mechanical Properties
Tensile strength42.2–81 MPa
Tensile modulus2450–4000 MPa
Elongation2.5–3.3 %
Flexural strength140 MPa
Flexural modulus2620–4260 MPa
Density1.3 g/cm³
Thermal
Heat deflection at 66 PSI99–142 °C
Print Constraints

Maximum build volume

800 × 800 × 550 mm

Min wall thicknessSLA 0.6 mm, DLP 0.6 mm, MSLA 0.6 mm, LCD 0.6 mm, PolyJet 1 mm
Min detail size0.25 mm
Default layer height0.1 mm
Default infill100%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.2 mm
Warping riskOver_140_mm
Interlocking partsNot supported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard Smooth

Standard Smooth

10 colors

High-temperature resin parts have a smooth, opaque gray surface with fine detail. The material is notably more brittle than standard resin, and thin walls under ~1 mm should be avoided given this added fragility.

All materials