MulticolorVisual

High Definition Full Color

The material used in this process is a curable UV resin, a full-color plaster that comes with a glossy or a sandstone surface. It is the perfect material for colorful figurines, life-like models, avatars, and other products that lend themselves to colorful, high-quality printing. When printing in this material, some variation in color shade is unavoidable, especially with difficult-to-produce colors such as browns and skin tones. You may see differences in color when looking at multiple prints of the same model side by side.

Print with High Definition Full Color

Mechanical Properties

Tensile strength50–80 MPa

Tensile modulus1400–3500 MPa

Elongation5–40 %

Flexural strength60–130 MPa

Flexural modulus1700–3200 MPa

Density1.01 g/cm³

Thermal

Heat deflection at 66 PSI

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

1 color

Multicolor+ for higher quality color prints.

All materials

Print Constraints

Maximum build volume

500 × 500 × 500 mm

Default layer height0.03 mm

Default infill100%

Min embossing0.5 mm

Min engraving0.5 mm

Accuracy± 0.2 mm

Warping riskLow

Interlocking partsSupported