For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
GreenTec Pro Carbon

GreenTec Pro Carbon

Composites
Heat resistantUV resistantFunctionalStrong

GreenTEC Pro Carbon is a fiber reinforced organic material and offers exceptional mechanical properties and creates very hard and stiff models that can withstand high loads while being light-weight. The fiber content also improves the heat resistance (VICAT) and the HDT value of the material under load. The material is also resistant to UV rays making it a good option for parts that need to be used outdoors.

Print with GreenTec Pro Carbon
Mechanical Properties
Tensile strength65 MPa
Tensile modulus7120 MPa
Elongation2.5 %
Density1.2 g/cm³
Print Constraints

Maximum build volume

601 × 601 × 601 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.2 mm
Warping riskModerate
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard Matte

Standard Matte

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The carbon fragments reduce the visibility of the layer lines, but light marks where support material was removed can be visible.

Sanded

Sanded

1 color

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials