For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
Glass Fiber PEEK

Glass Fiber PEEK

Composites
Wear resistantHeat resistantChemical resistantUV resistant

Glass fiber PEEK provides improved creep strength and dimensional stability along with a high level of mechanical strength and rigidity. It offers outstanding resistance to a broad range of chemicals, including automotive fluids, is insoluble in all common solvents, and is Inherently flame resistant. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. It is less suitable for bearing or wear applications.

Print with Glass Fiber PEEK
Mechanical Properties
Tensile strength105–160 MPa
Tensile modulus7250–9000 MPa
Elongation2.4–2.5 %
Flexural strength130–250 MPa
Flexural modulus5748–8500 MPa
Density1.44 g/cm³
Print Constraints

Maximum build volume

350 × 350 × 450 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.3 mm
Warping riskHigh
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

Sanded

Sanded

1 color

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials