For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
FDM TPU-ESD

FDM TPU-ESD

Flexible Plastics
FlexibleImpact resistantDurableWear resistant

TPU-ESD a flexible material which has an electrical resistance of approximately 3.9 Ω-cm. The material is suitable for low current applications such as wearable devices and other flexible electronics applications that require protection against electrostatic discharge (ESD). The flexibility varies based on the infill amount.

Print with FDM TPU-ESD
Mechanical Properties
Tensile strength28–34 MPa
Tensile modulus90 MPa
Elongation100–640 %
Flexural strength31 MPa
Density1.28 g/cm³
Print Constraints

Maximum build volume

601 × 601 × 601 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.4 mm
Warping riskLow
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

All materials