Print
Material
ABS

ABS

Standard Plastics
Impact resistantFunctionalWater resistantWear resistant

ABS (acrylonitrile butadiene styrene) is great for functional parts and prototypes with a need for stronger mechanical properties than PLA. ABS matches approximately 80% of the properties of injection-molded products but is rigid and inflexible, with design freedom limited due to the fused deposition modeling (FDM) printing process. The surface of an ABS model is always slightly rough due to the printing process and it can be difficult to post-process, though vapor smoothing can greatly improve its aspect.

Print with ABS
Mechanical Properties
Tensile strength32–45 MPa
Tensile modulus1618–2030 MPa
Elongation4.8–20 %
Flexural strength60–76 MPa
Flexural modulus1800–2070 MPa
Density1.04 g/cm³
Thermal
Heat deflection at 66 PSI81–95 °C
Heat deflection at 264 PSI80–95 °C
Print Constraints

Maximum build volume

1000 × 1000 × 1000 mm

Default layer height0.2 mm
Default infill20%
Min embossing2.5 mm
Min engraving1 mm
Accuracy± 0.3 mm
Warping riskModerate
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

60 colors

Standard layered finish in various colors.

Sanded

Sanded

60 colors

Smooth sanded finish in various colors.

Polished

Polished

19 colors

Glossy polished finish in various colors.

All materials